We repair common marine issues for South Sound boat owners, including skegs, hull and pontoon seams, railings, ladders, T-tops, and towers. The work starts with oxide removal and careful heat control to avoid porosity or distortion, and can be completed in our shop or on site when access is limited.

From utility trailers to work trucks, we handle frames, crossmembers, body panels, ramps, stake pockets, and tool boxes. Larger sections receive controlled heat input and proper fixturing to keep parts straight and true. If you need faster turnaround, call for priority scheduling.

We fix cracked aluminum rims and repair parts for cars, motorcycles, and ATVs/UTVs. TIG or MIG is selected based on thickness and alloy to achieve a strong, clean weld. Send a few clear photos for a quick estimate and we’ll outline cost and timing.

For homes and HOA areas, we restore broken gates, hinges, latches, and railing sections, and add reinforcement where needed. When pieces are fixed in place, we can complete the work on site to minimize disruption.

We repair and fabricate light structural and architectural elements such as canopies, guardrails, signage frames, and brackets. Proper prep and filler selection help reduce cracking and keep finishes consistent for storefronts or public spaces.

Shops and facilities across Lakewood, JBLM, and Tacoma call us for platforms, catwalks, safety railings, carts, fixtures, and machine components. We schedule planned maintenance and support urgent repairs with clear timelines to keep operations moving.

Castings such as housings, brackets, intake manifolds, and marine parts benefit from controlled preheat and the correct filler to limit post-weld cracking. We’ll review alloy details from your photos and recommend the best approach before work begins.

When you need one-off parts or light assemblies, we produce brackets, guards, trays, racks, enclosures, and small frameworks. We choose TIG or MIG to match the part’s thickness and finish needs, then deliver a clean result ready for use.

If the item is too large or fixed in place, we bring the equipment to you across Lakewood, Tacoma, and the South Sound. Mobile service is ideal for big gates, fixed railings, commercial gear, and dock work. Start by texting photos to (253) 475-4608 so we can confirm access and quote accurately.

For most jobs in Lakewood, the first step is a quick look at your photos. Text clear pictures of the part or damage to (253) 475-4608. We’ll confirm the goal, access, and timing, then set the plan and price.

Aluminum forms a hard oxide that melts at a higher temperature than the base metal. We remove oxide and contamination, dry the work, and preheat thicker sections when needed. This reduces porosity and helps the weld fuse cleanly.

Tight, consistent fit-up keeps the weld small and controlled. We use AC TIG for thin or cosmetic work and pulsed MIG for thicker parts where productivity and penetration matter.

We adjust current, travel speed, and arc time to limit distortion and prevent burn-through on thin material. Proper fixturing supports the part so it stays straight during weld and cool-down.

We match filler to the job and use pure argon or argon-helium mixes to protect the weld pool and improve results.

After cooling, we clean, dress sharp edges if requested, and check alignment before hand-off. For certain alloys, post-weld heat steps can further stabilize the part.

You’ll know the cost and a realistic timeline with your estimate. If moving the item isn’t practical, we can complete the work on site around Lakewood, Tacoma, and the South Sound. Call or text (253) 475-4608 to get on the schedule.